1st Attempt बर्बाद? Get 99%ile in 2nd Attempt & Dream IIT | Limited Seats

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF - eSaral

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF - eSaral

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF

Hey, are you a class 11 student and looking for ways to download NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF? If yes. Then read this post till the end.

In this article, we have listed NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant in PDF that are prepared by Kota’s top Doctor’s Faculties by keeping Simplicity in mind.

If you want to learn and understand class 11 Biology chapter 6 "Anatomy of Flowering Plant" in an easy way then you can use these solutions PDF.

NCERT Solutions helps students to Practice important concepts of subjects easily. Class 11 Biology solutions provide detailed explanations of all the NCERT questions that students can use to clear their doubts instantly.

If you want to score high in your class 11 Biology Exam then it is very important for you to have a good knowledge of all the important topics, so to learn and practice those topics you can use eSaral NCERT Solutions.

In this article, we have listed NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF that you can download to start your preparations anytime.

So, without wasting more time Let’s start.

Download NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF



Question 1: State the location and function of different types of meristem.

Solution Meristems are specialised regions of plant growth. The meristems mark the regions where active cell division and rapid division of cells take place. Meristems are of three types depending on their location.

Apical meristem

It is present at the root apex and the shoot apex. The shoot apical meristem is present at the tip of the shoots and its active division results in the elongation of the stem and formation of new leaves. The root apical meristem helps in root elongation.

Intercalary meristem

present between the masses of mature tissues present at the bases of the leaves of grasses. It helps in the regeneration of grasses after they have been grazed by herbivores Since the intercalary meristem and the apical meristem appear early in a plant's life, they constitute the primary meristem.

Lateral meristem

It appears in the mature tissues of roots and shoots. It is called the secondary meristem as it appears later in a plant's life. It helps in adding secondary tissues to the plant body and in increasing the girth of plants. Examples include fascicular cambium, interfascicular cambium, and cork cambium

Question 2: Cork cambium forms tissues that form the cork. Do you agree with this statement? Explain.

Solution. When secondary growth occurs in the dicot stem and root, the epidermal layer gets broken. There is a need to replace the outer epidermal cells for providing protection to the stem and root from infections. Therefore, the cork cambium develops from the cortical region. It is also known as phellogen and is composed of thin-walled rectangular cells. It cuts off cells toward both sides. The cells on the outer side get differentiated into the cork or phellem, while the cells on the inside give rise to the secondary cortex or phelloderm. The cork is impervious to water, but allows gaseous exchange through the lenticels. Phellogen, phellem, and phelloderm together constitute the periderm.

Question $3:$ Explain the process of secondary growth in stems of woody angiosperm with help of schematic diagrams. What is the significance?

Solution. In woody dicots, the strip of cambium present between the primary xylem and phloem is called the interfascicular cambium. The interfascicular cambium is formed from the cells of the medullary rays adjoining the interfascicular cambium. This results in the formation of a continuous cambium ring. The cambium cuts off new cells toward its either sides. The cells present toward the outside differentiate into the secondary phloem, while the cells cut off toward the pith give rise to the secondary xylem. The amount of the secondary xylem produced is more than that of the secondary phloem

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF Image 1

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF Image 2

Stages of secondary growth in dicot stem

The secondary growth in plants increases the girth of plants, increases the amount of water and nutrients to support the growing number of leaves, and also provides support to plants.

Question 4 : Draw illustrations to bring out anatomical difference between

(a) Monocot root and dicot root

(b) Monocot stem and dicot stem

Solution. (a)Monocot root and dicot root

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF Image 3

T.S. of dicot root (Primary)

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF Image 4

T.S. of monocot root

(b) Monocot stem and dicot stem

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF Image 5

T.S. of dicot stem

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF Image 6

T.S. of monocot stem

Question $5:$ Cut a transverse section of young stem of a plant from your school garden and observe it under the microscope. How would you ascertain whether it is a monocot stem or dicot stem? Give reasons.

Solution. The dicot stem is characterised by the presence of conjoint, collateral, and open vascular bundles, with a strip of cambium between the xylem and phloem. The vascular bundles are arranged in the form of a ring, around the centrally-located pith. The ground tissue is differentiated into the collenchyma, parenchyma, endodermis, pericycle, and pith. Medullary rays are present between the vascular bundles.

NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF Image 7

T.S. of dicot stem

The monocot stem is characterised by conjoint, collateral, and closed vascular bundles, scattered in the ground tissue containing the parenchyma. Each vascular bundle is surrounded by sclerenchymatous bundle-sheath cells. Phloem parenchyma is absent and water-containing cavities are present.



T.S of monocot stem

Question 6: The transverse section of a plant material shows the following anatomical features, (a) the vascular bundles are conjoint, scattered and surrounded by sclerenchymatous bundle sheaths (b) phloem parenchyma is absent. What will you identify it as?

Solution. The monocot stem is characterised by conjoint, collateral, and closed vascular bundles, scattered in the ground tissue containing the parenchyma. Each vascular bundle is surrounded by sclerenchymatous bundle-sheath cells. Phloem parenchyma and medullary rays are absent in monocot stems.

Question 7: Why are xylem and phloem called complex tissues?

Solution. Xylem and phloem are known as complex tissues as they are made up of more than one type of cells. These cells work in a coordinated manner, as a unit, to perform the various functions of the xylem and phloem.

Xylem helps in conducting water and minerals. It also provides mechanical support to plants. It is made up of the following components:

- Tracheids (xylem vessels and xylem tracheids)

- Xylem parenchyma

- Xylem fibres

Tracheids are elongated, thick-walled dead cells with tapering ends. Vessels are long, tubular, and cylindrical structures formed from the vessel members, with each having lignified walls and large central cavities. Both tracheids and vessels lack protoplasm. Xylem fibres consist of thick walls with an almost insignificant lumen. They help in providing mechanical support to the plant. Xylem parenchyma is made up of thin-walled parenchymatous cells that help in the storage of food materials and in the radial conduction of water

Phloem helps in conducting food materials. It is composed of:

- Sieve tube elements

- Companion cells

- Phloem parenchyma

- Phloem fibres

Sieve tube elements are tube-like elongated structures associated with companion cells. The end walls of sieve tube elements are perforated to form the sieve plate. Sieve tube elements are living cells containing cytoplasm and nucleus. Companion cells are parenchymatous in nature. They help in maintaining the pressure gradient in the sieve tube elements. Phloem parenchyma helps in the storage of food and is made up of long tapering cells, with a dense cytoplasm. Phloem fibres are made up of elongated sclerenchymatous cells with thick cell walls

Question 8: What is stomatal apparatus? Explain the structure of stomata with a labelled diagram.

Solution. Stomata are small pores present in the epidermis of leaves. They regulate the process of transpiration and gaseous exchange. The stomatal pore is enclosed between two bean-shaped guard cells. The inner walls of guard cells are thick, while the outer walls are thin. The guard cells are surrounded by subsidiary cells. These are the specialised epidermal cells present around the guard cells. The pores, the guard cells, and the subsidiary cells together constitute the stomatal apparatus.



Question 9: Name the three basic tissue systems in the flowering plants. Give the tissue names under each system.

Solution.



Question 10: How is the study of plant anatomy useful to us?

Solution. The study of plant anatomy helps us to understand the structural adaptations of plants with respect to diverse environmental conditions. It also helps us to distinguish between the strength of wood. This is useful in utilising it to its potential. The study of various plant fibres such as jute, flax, etc., helps in their commercial exploitation.

Question 11: What is periderm? How does periderm formation take place in dicot stem?

Solution. Periderm is composed of the phellogen, phellem, and phelloderm.

During secondary growth, the outer epidermal layer and the cortical layer are broken because of the cambium. To replace them, the cells of the cortex turn meristematic, giving rise to cork cambium or phellogen. It is composed of thin-walled, narrow and rectangular cells.

Phellogen cuts off cells on its either side. The cells cut off toward the outside give rise to the phellem or cork. The suberin deposits in its cell wall make it impervious to water. The inner cells give rise to the secondary cortex or phelloderm. The secondary cortex is parenchymatous.

Question 12: Describe the internal structure of a dorsiventral leaf with the help of labelled diagrams.

Solution. Dorsiventral leaves are found in dicots. The vertical section of a dorsiventral leaf contains three distinct parts.

[1] Epidermis:

Epidermis is present on both the upper surface (adaxial epidermis) and the lower surface (abaxial epidermis). The epidermis on the outside is covered with a thick cuticle. Abaxial epidermis bears more stomata than the adaxial epidermis.

[2] Mesophyll:

Mesophyll is a tissue of the leaf present between the adaxial and abaxial epidermises. It is differentiated into the palisade parenchyma (composed of tall, compactly-placed cells) and the spongy parenchyma (comprising oval or round, loosely-arranged cells with inter cellular spaces). Mesophyll contains the chloroplasts which perform the function of photosynthesis.

[3] Vascular system:

The vascular bundles present in leaves are conjoint and closed. They are surrounded by thick layers of bundle-sheath cells.



Also Read,

Class 11 Chemistry Notes PDF Download.

Class 11 Biology Book Chapterwise PDF Download.

Class 11 Biology Exemplar Chapterwise PDF Download.

If you have any Confusion related to NCERT Solutions for Class 11 Biology chapter 6 Anatomy of Flowering Plant PDF then feel free to ask in the comments section down below.

To watch Free Learning Videos on Class 11 Biology by Kota’s top Doctor’s Faculties Install the eSaral App

Leave a comment

Close

Click here to get exam-ready with eSaral

For making your preparation journey smoother of JEE, NEET and Class 8 to 10, grab our app now.

Download Now